|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Repair man |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
01-31-2011, 10:56 AM
|
|||
|
|||
Repair man
Model Number: JCD2389GEW Brand: Jenn-Air Age: 5 - 10 years
I have determined that the adaptive defrost board is not functioning. The new board that I purchased at Appliance Pros is not an exact replacement. There are six pins on the board that compliment the old board except for pin #5. The old board pin #5 is marked test and the new board is marked door. There is no connection to terminial #5 and it is temperairly jumpered to #6 for test defrost purposes.
Pin Old Board New Board #1 Defrost Heater Defrost Heater #2 Compresor Compressor #3 L2 L2 Skip pin #4 Stat Stat #5 Test Door #6 L1 L1 My Question is do I loose the test function with the new board and do I need to jumper pin #5 permanently as there is no door function wired to pin #5 on my unit? Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| repair | Ilir | Dryer Repair | 0 | 12-16-2010 10:23 AM |
| repair | judykaiser | Washer Repair | 0 | 07-27-2009 07:05 AM |
| repair | pepsiman62 | Oven Repair (including Ranges and Cooktops) | 1 | 05-24-2009 10:59 AM |
| sub zero repair | billmacke@yahoo.com | Refrigerator & Freezer Repair | 0 | 10-17-2007 07:26 AM |
Linear Mode
