Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
New Topic Post Reply
Gasket Replacement
Options
Go to last post Go to first unread
Model: RT1900DAE Brand: Maytag Age: More than 10 years
Previous Topic Next Topic
squirley174  
#1 Posted : Wednesday, November 26, 2008 5:30:01 PM(UTC)
Quote
squirley174

Rank: Member

Groups: Registered
Joined: 11/25/2008(UTC)
Posts: 2
I recently received a new freezer door gasket for the above model and brand. However, here are no instructions on how to install it. Can you walk me through the process so I don't mess up the door.

Also, the end caps I received don't seem to fit tightly on the first shelf bar on the refrigerator door. The P/N is: 67213-2. I'm afraid because it won't hold properly the stuff on the shelf is going to fall off and break. What is the solution.

Thank you, Shirley Lance
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
v2k04  
#2 Posted : Wednesday, November 26, 2008 6:26:29 PM(UTC)
Quote
v2k04

Rank: Advanced Member

Groups: Senior Expert
Joined: 10/9/2008(UTC)
Posts: 784
oh boy!! .. first lay out the gasket on the floor and get all the wrinkles out of it. Use a hair dryer until it is relativly straight dont get it to hot or to close cuz you'll melt it another way is running it under hot water to remove wrinkles get that done first and let us know
Back to top
squirley174  
#3 Posted : Thursday, November 27, 2008 4:24:46 AM(UTC)
Quote
squirley174

Rank: Member

Groups: Registered
Joined: 11/25/2008(UTC)
Posts: 2
Is it that difficult? Should I have a repair man do it? What about the end cap issue?
Back to top
v2k04  
#4 Posted : Thursday, November 27, 2008 4:34:12 AM(UTC)
Quote
v2k04

Rank: Advanced Member

Groups: Senior Expert
Joined: 10/9/2008(UTC)
Posts: 784
yes it is you can't just slap the gasket on and expect the door to close on the first try sometimes it takes a lot of adjusting to get it right I cant tell by the diagram what kind of end caps you have I would call a repairman have him do the gasket and tell you whats wrong with the endcaps.
Back to top
GracieC74  
#5 Posted : Tuesday, January 6, 2009 12:43:36 PM(UTC)
Quote
GracieC74

Rank: Member

Groups: Registered
Joined: 1/6/2009(UTC)
Posts: 1
I just replaced my refrigerator door gasket and I can't get it to seal all the way around. The top of the right side seals but the bottom has to be pushed in to get the seal. The top has a few spots that are not, but the hinged side is sealed all the way. I can not see whether the bottom is sealed or not. Is there something I have to put on the gasket or is it just not aligned properly? Thanks
Back to top
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
upright freezer frosting/icing after gasket replacement (Refrigerator & Freezer Repair)
by woakley 9/30/2019 7:09:57 AM(UTC)
LG fridge door gasket replacement - french doors (Refrigerator & Freezer Repair)
by bcarroll7 7/28/2019 11:14:38 AM(UTC)
Gasket replacement for Imperial freezer (Refrigerator & Freezer Repair)
by bdcane 9/3/2017 8:38:37 AM(UTC)
Door Gasket replacement (Refrigerator & Freezer Repair)
by mlbmark 12/6/2012 4:38:53 PM(UTC)
Front Loader gasket replacement (Washer Repair)
by maduro858 12/11/2011 7:22:43 PM(UTC)
Refrigerator door gasket replacement (Refrigerator & Freezer Repair)
by Tom Carty 6/23/2011 9:22:00 AM(UTC)
Fridgerator door gasket replacement (Refrigerator & Freezer Repair)
by plumber365 1/25/2011 5:50:02 PM(UTC)
Front Rubber Gasket replacement (Washer Repair)
by cbonasera 9/26/2010 11:43:22 AM(UTC)
Whirlpool Oven Gasket Replacement (Oven Repair (including Ranges and Cooktops))
by dwell 8/18/2010 8:03:46 AM(UTC)
Bottom freezer door gasket replacement (Refrigerator & Freezer Repair)
by PageinSC 7/18/2010 7:42:53 AM(UTC)
freezer door gasket replacement (Refrigerator & Freezer Repair)
by grenoble 4/9/2010 7:23:57 AM(UTC)
HE3T Door gasket replacement (Washer Repair)
by gbramhall 1/13/2010 3:41:41 PM(UTC)
ap4010226 gasket replacement (Washer Repair)
by RINKYDINKS 1/2/2010 4:38:27 PM(UTC)
Tub Gasket Replacement Help (Washer Repair)
by jrussell_75423 12/22/2009 9:37:42 AM(UTC)
freezer gasket replacement (Refrigerator & Freezer Repair)
by cleaver 12/15/2009 12:27:21 PM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET