[ajME]

what does the code f-51 and sd means

[libertyappl]

Motor RPS Failure

F

then 51 flashes when there is a motor rotor
position sensor (RPS) failure or lower harness

problem.

Suds Detection

Sd

is displayed when the machine/motor control,
by analyzing drag on the basket, detects a
suds-lock condition, and is steady on while the
control then runs a mini-clean out cycle. If the
clean out cycle is unable to correct the
over-sudsing problem, the cycle ends and Sd

flashes in the display. This may signify:

➔

Load is bunched or twisted around agitator.

➔

Excessive detergent usage.

➔

Basket cannot engage during drain step.

➔

Mechanical friction on drive mechanism,

not allowing basket to engage.

Nat

[v2k04]

It over suds and the motor overloaded and hence the failures Make sure you use "HE" Detergent