|
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » how to force freezer to defrost? |
|
|
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
|||
|
Model Number: GBS22HCPACC Brand: GE Age: 1 - 5 years
Freezer works great and frige was warm so after reading all the posts here i removed the rear panel and found the evaporator to be a block of ice so i defrosted it with a hair drier and everything is back to normal but i know it wont last. The heating element is a double that runs along the bottom and looks similar to the same element is a stove. Question is how can i test the element or fire it off to see if it gets hot to make sure it is working? i read somwhere to short the thermostat and jump some pins but not sure that it pertains to my model refrigerator. And how can i test the bi metal thermostat? Damper fan works fine and damper is open. Ads By Google Related Models Last edited by blitzen2 : 10-14-2010 at 05:28 PM. Reason: clarifying |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
|
||||
|
__________________
Appliance Repair Expert in Orange County, California. Order Appliance Parts with 365-Day Hassle Free Return Policy - AppliancePartsPros.com |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Force defrost | Anishinaabe | Refrigerator & Freezer Repair | 0 | 04-10-2010 08:48 AM |
| How do you force defrost on Hoptpoint refrigerator | Robert6236 | Refrigerator & Freezer Repair | 0 | 02-12-2010 03:35 PM |
| ?? How to force a defrost cycle?? | bajafine | Refrigerator & Freezer Repair | 1 | 05-19-2008 03:09 AM |
| Force defrost on board GE Fridge? | mmalone2 | Refrigerator & Freezer Repair | 4 | 04-11-2008 02:27 AM |