Refrigerator & Freezer Repair

Glenn Edleman · #1 (**permalink**) 10-13-2010, 09:55 AM

Ice dispensor motor not working. Water will dispense so I swapped the two activator switches in hte front side of the door to see if it was that. Still had the same problem and water still dispensed with the other switch. How do you access the motor? I tried removing the pannel under the ice bucket but am affraid to break if I pry too hard. I removed the front cover on the door but could not get the scondary panel off. Again didn't want to pry too much in fear of breaking.

magician59 · #2 (**permalink**) 10-13-2010, 10:39 AM

Does it work, if you select a different type of ice (for instance, if you normally use cubes; try selecting crushed, and see if the result is the same).

Glenn Edleman · #3 (**permalink**) 10-14-2010, 04:20 PM

Yes I tried both cubed and crushed

magician59 · #4 (**permalink**) 10-15-2010, 07:13 AM

I don't have anything that comes close to your model number. Is your ice dispenser in the door, or is your ice maker attached to the side of your freezer?

Glenn Edleman · #5 (**permalink**) 10-16-2010, 08:05 PM

Sorry I did a typo on the model number. It is GS6 not GSS.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ice dispensor doesn't dispense the ice	johnsomi	Refrigerator & Freezer Repair	0	06-05-2010 08:29 PM
Water dispensor	JC1	Refrigerator & Freezer Repair	2	07-06-2009 06:47 AM
Water Dispensor	tonyc	Refrigerator & Freezer Repair	0	01-31-2009 01:50 PM
ice maker dispensor	hemihead	Refrigerator & Freezer Repair	0	10-09-2007 03:53 PM

Whirlpool Ice dispensor

Refrigerator & Freezer Repair

Ice dispensor motor not working. Water will dispense so I swapped the two activator switches in hte front side of