Refrigerator & Freezer Repair

nss · #1 (**permalink**) 10-17-2008, 03:22 PM

My side by side has me beside myself. It was icing up so i put in a new bimetal and it improved. Still not cold enough so i put in a new micro computer and when i turned on the unit the compressor ran for a few seconds and all stopped. I get a 2E 3C error on the controls in the ref. cabnet. what happened and what do i do next. when i put the old board back in it did the same thing. NSS thanks/

icehouse · #2 (**permalink**) 10-17-2008, 03:59 PM

Quote:

Originally Posted by nss

My side by side has me beside myself. It was icing up so i put in a new bimetal and it improved. Still not cold enough so i put in a new micro computer and when i turned on the unit the compressor ran for a few seconds and all stopped. I get a 2E 3C error on the controls in the ref. cabnet. what happened and what do i do next. when i put the old board back in it did the same thing. NSS thanks/

http://www.servicematters.com/docs/w...iring_main.htm

nss · #3 (**permalink**) 10-17-2008, 07:32 PM

There's no answer in your reply. It's blank. Please send me the answer again. THanks, nss

libertyappl · #4 (**permalink**) 10-17-2008, 08:00 PM

Just click on the link and paste your model number in the space and you will get the other page.
Nat

icehouse · #5 (**permalink**) 10-18-2008, 06:05 AM

Thank You Nat.

libertyappl · #6 (**permalink**) 10-18-2008, 07:15 AM

Just helping what I can.
Nat

v2k04 · #7 (**permalink**) 10-18-2008, 07:24 AM

Which microcomputer did you replace? The one in the machine compartment? or the adaptive defrost control in the control panel?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
oven woes	jmthurmond	Oven Repair (including Ranges and Cooktops)	1	11-24-2009 03:56 AM
What could it be now? Oven Woes	shokwaves	Oven Repair (including Ranges and Cooktops)	0	11-11-2009 05:32 AM
Igniter woes	redfred	Dryer Repair	3	08-28-2008 06:45 AM
sub zero woes	pacoflyer	Refrigerator & Freezer Repair	1	08-24-2008 07:47 PM
Icemaker Woes	FastPhil	Refrigerator & Freezer Repair	3	11-10-2007 11:39 AM

Refrigerator woes

Refrigerator & Freezer Repair

My side by side has me beside myself. It was icing up so i put in a new bimetal and