[koke41]

I am having a problem already reported in this forum but for other models of GE: frost build up in the ice shoot and bottom of the ice dispenser. The flapper is in bad shape. My problem is how to do it. I already ordered part# AP3672582. The solution described in another thread is " you insert a blunt butter knife blade on the outside of the freezer door below the outside trim of the dispenser. There are two plastic tabs along the bottom of the trim that you must release. Then you can swing out the bottom of the trim plate and remove it, leaving the body of the dispenser still mounted in the door. " Is this the same procedure for my TFX25PPBGBB? I do not touch any tab when I insert the knife in my case.
Thanks in advance for any help.