Rank: Member
Groups: Registered
Joined: 7/30/2010(UTC)
Posts: 4
|
The water reservoir inside the refrigerator has 2 plastic tubes attached to it. One needs to be replaced. There is a plastic seal around the tube where it enters the reservoir. It looks like some sort of shrink wrap. What is the proper method to remove the tube and seal and replace the new tube?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Expert
Joined: 7/27/2010(UTC) Posts: 1,395  Location: near the middle of nowhere Was thanked: 24 time(s) in 24 post(s)
|
Originally Posted by: Gotnoidea  The water reservoir inside the refrigerator has 2 plastic tubes attached to it. One needs to be replaced. There is a plastic seal around the tube where it enters the reservoir. It looks like some sort of shrink wrap. What is the proper method to remove the tube and seal and replace the new tube? Unless that tube has a plastic nut that can be unscrewed, you are going to need a whole new water reservoir. Luckily they don't cost too much Part number: AP2066390
The plastic they make these out of seems to be glue and epoxy resistant, so virtually nothing adheres to it.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 7/30/2010(UTC)
Posts: 4
|
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
