Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
darwin-t  
#1 Posted : Monday, June 11, 2018 10:42:49 PM(UTC)
darwin-t

Rank: Member

Groups: Registered
Joined: 6/11/2018(UTC)
Posts: 1

My Maytag dishwasher has stopped working. One LED is lit. It is to the left on the START/CANCEL button. The outline of the icon looks kind of like a padlock and it has the number 3 in it.If I push it, it blinks for several seconds and reverts back to being lit.

I found the technical manual behind bottom panel. I have tried doing the Field Service Test, but it never starts.

After trying several times, I have been able to run the Field Service Test.It goes through the test, then reverts back to the one LED being lit. No other LEDs light up after the test - they all come on during the test, except the HEAVY WASH LED with blinks during the test.

I don't know what to do next. Any suggestions would be greatly appreciated.

Thanks.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Users browsing this topic
Similar Topics
Maytag Dishwasher Problem (Dishwasher Repair)
by jsarp 10/26/2012 1:25:35 PM(UTC)
Maytag dishwasher problem (Dishwasher Repair)
by shannonflo 5/28/2012 2:38:38 PM(UTC)
maytag dishwasher problem (Dishwasher Repair)
by Julio P. 12/9/2009 11:30:22 AM(UTC)
Maytag dishwasher problem (Dishwasher Repair)
by mvs 12/3/2009 10:09:05 PM(UTC)
Maytag dishwasher problems (Dishwasher Repair)
by quickdraw 9/24/2009 9:28:39 PM(UTC)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.