Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
xxxshiftxxx  
#1 Posted : Saturday, January 16, 2016 1:25:28 PM(UTC)
xxxshiftxxx

Rank: Member

Groups: Registered
Joined: 3/1/2015(UTC)
Posts: 2

My Bryant furnace stopped working in the middle of the night. Woke up to a cold house.

I have tried resetting the furnace by turning off power for a minute then trying again. Didn't work. The thermostat clicks and sends the call to heat, but nothing happens at the furnace.

I am not receiving any error codes. Just a solid red light indicating I have power.

I have disconnected the line from the pressure switch and blew through it. No resistance, clear.

Checked drain pan, clear no water.

Cleaned flame sensor with sandpaper.

Any ideas? The no error code is what is confusing me.

Thanks!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
kjoshua48  
#2 Posted : Sunday, January 24, 2016 5:01:26 PM(UTC)
kjoshua48

Rank: Member

Groups: Registered
Joined: 1/24/2016(UTC)
Posts: 1

Check fuse on ICM (Circuit board)... You might be need replace ICM..
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.