Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
dtdiep  
#1 Posted : Friday, August 1, 2008 11:48:39 AM(UTC)
Quote
dtdiep

Rank: Member

Groups: Registered
Joined: 8/1/2008(UTC)
Posts: 1

Hi, I have a Whirlpool Calypso Washer and it will not respond to any commands. The panel always reads 44 minutes just as if you were select the normal wash for your cycle. It does not respond to any other buttons being pushed. If you were to unplug the washer and then plug it back in, it immediately comes back on with the same display again without you having to push anything. I am just not sure what part could be the problem. Is it the control board or the touch panel itself. Any advice or guidance that you could give would be great.

Thank you for your help.
D
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
jay9890  
#2 Posted : Thursday, October 23, 2008 3:34:51 AM(UTC)
Quote
jay9890

Rank: Member

Groups: Registered
Joined: 10/23/2008(UTC)
Posts: 1

I have the same problem. Did you get your machine fixed? What was the problem? Trying to decide to repair or replace this piece of junk. Thanks.
v2k04  
#3 Posted : Thursday, October 23, 2008 3:47:23 AM(UTC)
Quote
v2k04

Rank: Advanced Member

Groups: Senior Expert
Joined: 10/9/2008(UTC)
Posts: 784

I have a service manual I'll get back to ya on what to check
drfixit  
#4 Posted : Wednesday, May 13, 2009 6:37:03 PM(UTC)
Quote
drfixit

Rank: Member

Groups: Registered
Joined: 5/13/2009(UTC)
Posts: 1

I have the same problem on my washer... please let me know what you did to repair your washer? Thanks in advance for your help.
Jon
denman  
#5 Posted : Thursday, May 14, 2009 2:15:49 AM(UTC)
Quote
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Replacement parts for WHIRLPOOL GVW9959KQ1 | AppliancePartsPros.com

Here is the tech sheet
https://www.servicematters.com/d...0Sheet%20-%208530143.pdf
Try running the diagnostics to narrow the problem down.
Could be a stuck key on the keypad.

And here is a service manual
https://secured.whirlpoo...4632a4/$FILE/8178010.pdf
THIS FORUM IS DEAD!!!!!!!
NSSS  
#6 Posted : Saturday, September 18, 2010 10:20:28 PM(UTC)
Quote
NSSS

Rank: Member

Groups: Registered
Joined: 9/18/2010(UTC)
Posts: 1

Our Whirlpool washer is GVW9959KQ0, bought in September 2001,
in September 2010 it had the problem as follow.
When the panel was lite up, it was always set at "44" minute, NORMAL wash,
no touch area is responsive, not even STOP or START.

Since the washing functionality sounds and looks working well to me,
I thought that the panel might be the culprit.
We ordered Control Panel Assembly (Parts AP3884746,
it is just the panel part where we touch for washing selections
w/o electronic boards behind it) at appliancepartspros.com
(cost $177 + regular S&H, arrived in 2 business days),
as suggested by many posters in the internet who has almost
exact same problems. It works for now, just had 3 consecutive loads.
Hope it works for years to come... BTW, our drier had the same problem,
back then 4 years ago, its Panel Assemby was also replaced.
hese problems happened after we had power outage, probably power surge,
during storms.
kato618  
#7 Posted : Monday, January 17, 2011 12:23:14 PM(UTC)
Quote
kato618

Rank: Member

Groups: Registered
Joined: 1/17/2011(UTC)
Posts: 2

Hi NSSS, im havng the same propblem with my Calypso washer. Planing to order the Control Panel Assembly, but before doing so like to check with you on how yours is performing. my washer lite up showing 28 minute and after which no touch area is responsive as well.
kato618  
#8 Posted : Monday, January 17, 2011 12:30:38 PM(UTC)
Quote
kato618

Rank: Member

Groups: Registered
Joined: 1/17/2011(UTC)
Posts: 2

Can anyone at APP send me a diagram on how to replace the Control Panel Assembly AP3884746 on the Whirpool Calypso Model #GVW9959KTO as suggested by NSSS. we do have the same problem on this model. Thanks.
denman  
#9 Posted : Tuesday, January 18, 2011 5:20:59 AM(UTC)
Quote
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here is the service manual
L-67 Whirlpool Calypso Washer Service Manual - ApplianceDigest.com

You will have to join the site to download the manual but it is free and is a very good site for appliance info.
THIS FORUM IS DEAD!!!!!!!
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.