Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Post a reply
From:
Message:

Maximum number of characters in each post is: 32767
Bold Italic Underline   Highlight Quote Choose Language for Syntax Highlighting Insert Image Create Link   Unordered List Ordered List   Left Justify Center Justify Right Justify   Outdent Indent   More BBCode Tags
Font Color Font Size
Security Image:
Enter The Letters From The Security Image:
  Preview Post Cancel

Last 10 Posts (In reverse order)
denman Posted: Monday, March 22, 2010 2:19:40 AM(UTC)
 
Here are your parts
Replacement parts for FRIGIDAIRE FRS26ZRGWA Frg(v3) / Refrigerator | AppliancePartsPros.com

Here is a wiring diagram/tech sheet.
http://manuals.frigidaire.com/prodinfo_pdf/Anderson/218909400.pdf

[COLOR="Blue"]Tested Defrost Timer, Continuity Good When Advancing Timmer Shaft[/COLOR]
Not sure how you measured this so cannot comment.
[COLOR="Blue"]
Defrost Thermostat Checks With Continuity When Warm And Then When Placed In Freezer[/COLOR]
This is a problem. The thermostat should be open (infinite ohms) at room temperature and closed (0 ohms) when frozen, see the tech sheet.

[COLOR="Blue"], Defrost Heater,no Conitinuity,1/4" Tube Has A Crack On One Of The Bends Visually Hollow Inside, Continuityon Both Sides Of The Tube. No Continuity From Bullet Connctor To Tube Either Side[/COLOR]
You lost me here.
The defrost heater should measure approximately 22 ohms, see the tech sheet
THIS FORUM IS DEAD!!!!!!!
bco3321 Posted: Sunday, March 21, 2010 10:38:04 AM(UTC)
 
Tested Defrost Timer, Continuity Good When Advancing Timmer Shaft , Defrost Thermostat Checks With Continuity When Warm And Then When Placed In Freezer, Defrost Heater,no Conitinuity,1/4" Tube Has A Crack On One Of The Bends Visually Hollow Inside, Continuityon Both Sides Of The Tube. No Continuity From Bullet Connctor To Tube Either Side