Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Post a reply
From:
Message:

Maximum number of characters in each post is: 32767
Bold Italic Underline   Highlight Quote Choose Language for Syntax Highlighting Insert Image Create Link   Unordered List Ordered List   Left Justify Center Justify Right Justify   Outdent Indent   More BBCode Tags
Font Color Font Size
Security Image:
Enter The Letters From The Security Image:
  Preview Post Cancel

Last 10 Posts (In reverse order)
5starbaby Posted: Tuesday, October 6, 2009 5:46:33 AM(UTC)
 
Its nearly always the heater assy, not a rarity at all , and always change the complete defrost heater, dont muck around just replacing the thermostat!!Good night and good luck.
CRAIGIE Posted: Monday, October 5, 2009 4:41:09 PM(UTC)
 
Thank you very much again.Should the heater get warm to touch or will the frost just start to melt?Frost started to disappear when i turned the timer slot as you suggested just not sure if the melting was due to the heater or the fact the compressor stopped.The heater didn't feel any warmer to touch.Thanks again.
richappy Posted: Monday, October 5, 2009 5:17:37 AM(UTC)
 
The defrost timer part # AP4071015, the defrost thermostat comes with the heater attached, AP4069915 for $33. You can opt for the thermostat separately, WR50X55, a universal replacement for $4.
If you suspect the thermostat is bad, just remove it, short the wires together temporarily, and see if the heater now works.
CRAIGIE Posted: Monday, October 5, 2009 4:08:15 AM(UTC)
 
Thanks for your assistance. Is a visual observation of the condenser the only way to assess if the defrost heater is working. Would you have part numbers for the two parts suggested.
richappy Posted: Monday, October 5, 2009 3:08:29 AM(UTC)
 
You have a cal-rod heater that rarely fails. Reach in the bottom of the fridg control panel and stick a flat bladed screwdriver in the hole and turn the defrost timer till the compressor stops. If no defrost, you probably have a bad defrost terminator, a round thing clipped to the evaporator coil.
If you get defrost, replace the defrost timer.
5starbaby Posted: Monday, October 5, 2009 2:59:38 AM(UTC)
 
replace defrost heater after checking continuity when its cold
CRAIGIE Posted: Sunday, October 4, 2009 11:57:35 PM(UTC)
 
Hi ,i Have A Maytag Fridge Freezer In Which The Freezer Coils Are Fronen And The Fridge Doesnt Work.if I Defrost The Coil With A Hairdryer The System Works For A Week.could You Help Please.