Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Post a reply

From:

Message:

Maximum number of characters in each post is: 32767

Font Color Font Size

[quote=carleisenberg;800091]The probe indicator is on, and asking me to remove the probe.
By going to roast or bake i can start the oven but not clean or do anythihg else.  I am gong to guess it is the control panel.

Carl:([/quote]

Security Image:

Enter The Letters From The Security Image:

Preview Post Cancel

Last 10 Posts (In reverse order)
denman	Posted: Tuesday, February 19, 2013 3:03:54 AM(UTC)
	Are you sure that the last digit is a Z and not a 7? No info comes up for a DWHZ. Below is info on a KEBS277DWH7 Here are your parts Parts for Whirlpool KEBS277DWH7 Wall Oven - AppliancePartsPros.com See the attachment for the tech sheet I would disconnect the meat probe at the control board before replacing the control board, just to be sure that some crud has not contaminated the probe jack and the unit is reading this as the probe being connected. You could also check the probe resistance when it is not installed. Then unplug/remove power from the unit. Install the probe then check it's resistance at the control board.
	THIS FORUM IS DEAD!!!!!!!
carleisenberg	Posted: Sunday, February 17, 2013 5:01:53 AM(UTC)
	The probe indicator is on, and asking me to remove the probe. By going to roast or bake i can start the oven but not clean or do anythihg else. I am gong to guess it is the control panel. Carl:(

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close