Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Post a reply

From:

Message:

Maximum number of characters in each post is: 32767

Font Color Font Size

[quote=denman;130969]Here are that parts
[url]http://manuals.frigidaire.com/prodinfo_pdf/Springfield/316257122en.pdf[/url]

[COLOR=Blue]am I safe to assume the water valve on the washer is bad?   [/COLOR] 
Not really, as it may not be getting power.

Check that the valve is getting 120 volts when it should.

IF YES then it the valve
Remove the valve and check the filter screen on it's input side.
If dirty clean it. Do not remove it, it is there to keep crud out of the valve which would hold it open and cause a flood.
If clean replace the valve.

IF NO then it is probably the control board. Could also be a broken/loose wire.[/quote]

Security Image:

Enter The Letters From The Security Image:

Preview Post Cancel

Last 10 Posts (In reverse order)
denman	Posted: Wednesday, September 23, 2009 12:52:51 AM(UTC)
	Here are that parts http://manuals.frigidaire.com/p...ingfield/316257122en.pdf am I safe to assume the water valve on the washer is bad? Not really, as it may not be getting power. Check that the valve is getting 120 volts when it should. IF YES then it the valve Remove the valve and check the filter screen on it's input side. If dirty clean it. Do not remove it, it is there to keep crud out of the valve which would hold it open and cause a flood. If clean replace the valve. IF NO then it is probably the control board. Could also be a broken/loose wire.
	THIS FORUM IS DEAD!!!!!!!
dack	Posted: Tuesday, September 22, 2009 6:44:29 AM(UTC)
	My dishwasher turns on but water does not enter. I have water to the water valve, am I safe to assume the water valve on the washer is bad?

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close