Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Post a reply
From:
Message:

Maximum number of characters in each post is: 32767
Bold Italic Underline   Highlight Quote Choose Language for Syntax Highlighting Insert Image Create Link   Unordered List Ordered List   Left Justify Center Justify Right Justify   Outdent Indent   More BBCode Tags
Font Color Font Size
Security Image:
Enter The Letters From The Security Image:
  Preview Post Cancel

Last 10 Posts (In reverse order)
denman Posted: Tuesday, May 1, 2012 12:51:57 AM(UTC)
 
See the attachment for the tech sheet.

You will have to check the heating element (10 to 30 ohms) and the hi-limit thermostat (0 ohms) for continuity.

If both are OK then odds are that the control board is toast.
THIS FORUM IS DEAD!!!!!!!
njbxgirl Posted: Monday, April 30, 2012 12:03:37 PM(UTC)
 
There is not tons of eater but there is standing water. I did not see any steam coming out on the drying cycle plus no steam when washing. There is usually condisation on the counter and have not noticed that either.
denman Posted: Monday, April 30, 2012 11:22:29 AM(UTC)
 
Here are your parts
Replacement parts for Whirlpool DU1055XTVD1 UNDERCOUNTER DISHWASHER | AppliancePartsPros.com

"It leaves tons of water on the dishes and in the washer itself"
Does the above mean that there is water standing in the bottom of the unit after the wash is finished?

Do you know if the heating element is coming on during dry?
Be careful do not burn your fingers.
THIS FORUM IS DEAD!!!!!!!
njbxgirl Posted: Saturday, April 28, 2012 7:25:12 PM(UTC)
 
I have just started noticing that my dishwasher is not drying at all. It leaves tons of water on the dishes and in the washer itself. I have to manually dry them. This has never been an issue before so I am wondering what gives. Just recently installed an electric hot water heater to my home with a new water softener system and am wondering is this the cause because when oil was being used to heat water this never happened. All looks fine inside nothing is cracked or broken so what can be the issue. Please help because my warranty just ran out. Thanks.