Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Post a reply

From:

Message:

Maximum number of characters in each post is: 32767

Font Color Font Size

[quote=sidfink43;660995]Usually the front panel comes off of the LAT models, by releasing clips that hold the front to the cabinet.  Insert a screw driver in the gap between the top and front near the edges and see if that works.

If it doesn't post a full model number or use that model number to look at exploded views of your machine on this site under the parts section.[/quote]

Security Image:

Enter The Letters From The Security Image:

Preview Post Cancel

Last 10 Posts (In reverse order)
sidfink43	Posted: Monday, February 6, 2012 5:09:25 PM(UTC)
	Usually the front panel comes off of the LAT models, by releasing clips that hold the front to the cabinet. Insert a screw driver in the gap between the top and front near the edges and see if that works. If it doesn't post a full model number or use that model number to look at exploded views of your machine on this site under the parts section.
Letty Jo	Posted: Saturday, February 4, 2012 4:56:12 PM(UTC)
	My wash machine is leaking from underneath. It seems like it is from back to front. How do you get into the maching. From the Front Panel?

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close