Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Last 10 Posts (In reverse order)
Gene	Posted: Friday, July 3, 2009 1:40:03 PM(UTC)
	Keep us posted. Gene.
lisalachele	Posted: Thursday, July 2, 2009 9:40:53 PM(UTC)
	Ok will do! Thanks again for your help! Lisa :o
Gene	Posted: Thursday, July 2, 2009 5:42:52 PM(UTC)
	You are welcome Lisa, You will see it as soon you'll remove the toe panel. Do not forget to turn off the dishwasher water shut off valve under the sink. Gene.
lisalachele	Posted: Thursday, July 2, 2009 10:34:48 AM(UTC)
	Thanks so much I think I will order that part and give it a try. Here is a blonde question k! The diagram shows where the valve is located correct? :confused: Thanks Lisa
Gene	Posted: Tuesday, June 30, 2009 1:59:58 PM(UTC)
	Hi Lisa, Most likely a bad water inlet valve (#744 on the diagram) Gene.
lisalachele	Posted: Tuesday, June 30, 2009 9:29:50 AM(UTC)
	Ok last night I turned on dishwasher while it was open to see what was happening. It was obvious that there was not enough water pressure. Possibly a bad pump? Thanks Lisa
lisalachele	Posted: Monday, June 29, 2009 11:18:40 PM(UTC)
	HMMM! I am so sorry for not understanding.... so when the dishwasher starts a certain amount of water will fill up first?
Gene	Posted: Monday, June 29, 2009 7:28:35 PM(UTC)
	What is the water level inside the dishwasher? Normally it suppose to be no lower than the notch on the right side of the float cup cover. Here are the breakdown diagrams and Replacement parts for GE GHDA475M15CS \| AppliancePartsPros.com Gene.
lisalachele	Posted: Monday, June 29, 2009 7:06:26 PM(UTC)
	The Make is GE GHDA475M15CS
Gene	Posted: Monday, June 29, 2009 3:25:22 PM(UTC)
	What is the complete model number of the dishwasher? Gene.

Notification