Hello,

I have an Admiral washer that will not spin. We had an article of clothing get under the agitator and got stuck. I had to remove the agitator to free the piece of clothing. I re-assembled the washer and proceeded to see if the machine would complete a cycle.
[LIST=1]

I loaded a very small load

Set water level for a small load

The water level filled to desired amount

I used a clothes pin to depress the lid switch so I could watch

The washer went through the proper steps: fill, wash

When it reached the spin cycle it would not spin.

The agitator would work, but no spin.

During the spin cycle the water would drain[/LIST]Also of note:
I tipped the washer up and the belt is intact and the motor turns.
BUT the tub will not turn manually at all.

Any help or suggestions would be greatly appreciated.