Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Post a reply

From:

Message:

Maximum number of characters in each post is: 32767

Font Color Font Size

[quote=LoginFreak;88469]If it's a kenmore 80s model then you probably have a clutch problem if it spins with nothing in it but not when some weight is applied.

This link will bring you to the clutch.
[url=http://www.appliancepartspros.com/modelsearch_model.aspx?part_id=3094537&model_id=416129&pkw_=clutch&x=0&y=0]WHIRLPOOL Clutch assembly, part number: 285785[/url]

This is an educated guess.. But since the washer does spin with no clothes in it, this definitely points to the clutch.

If the washer does not spin at all with no load. And doesn't wash.
Then the motor coupling is most likely the problem.
It can be found here.
[url=http://www.appliancepartspros.com/modelsearch_model.aspx?part_id=3963893&model_id=416129&pkw_=coupling&x=0&y=0]WHIRLPOOL Motor coupling (for Direct Drive Washers), part number: 285753A[/url]

If you have any questions let us know.[/quote]

Security Image:

Enter The Letters From The Security Image:

Preview Post Cancel

Last 10 Posts (In reverse order)
LoginFreak	Posted: Sunday, May 17, 2009 10:28:35 AM(UTC)
	If it's a kenmore 80s model then you probably have a clutch problem if it spins with nothing in it but not when some weight is applied. This link will bring you to the clutch. WHIRLPOOL Clutch assembly, part number: 285785 This is an educated guess.. But since the washer does spin with no clothes in it, this definitely points to the clutch. If the washer does not spin at all with no load. And doesn't wash. Then the motor coupling is most likely the problem. It can be found here. WHIRLPOOL Motor coupling (for Direct Drive Washers), part number: 285753A If you have any questions let us know.
Mike Ganoe	Posted: Sunday, May 17, 2009 7:23:49 AM(UTC)
	I have a Kenmore 80 series model # 110.29852991 that will not spin. Wife tried washing a load and motor sounded like it was going to stop spinning, kept slowing down. Removed clothes and tried cycle empty. Washer would not spin at all, this is on the permanent press cycle. Tried running an empty load on ultra clean cycle and it seems to work fine. Is it the motor going bad, electric control know, etc, etc???? Any help would be greatly appreciated. Thanks Mike

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close