Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Post a reply
From:
Message:

Maximum number of characters in each post is: 32767
Bold Italic Underline   Highlight Quote Choose Language for Syntax Highlighting Insert Image Create Link   Unordered List Ordered List   Left Justify Center Justify Right Justify   Outdent Indent   More BBCode Tags
Font Color Font Size
Security Image:
Enter The Letters From The Security Image:
  Preview Post Cancel

Last 10 Posts (In reverse order)
denman Posted: Sunday, May 17, 2009 8:42:12 AM(UTC)
 
I should have thought of that, sometimes I must be wide asleep.

Jim's suggestion is a high probability, because if the heater was on full with no air movement it should blow the thermal fuse.
THIS FORUM IS DEAD!!!!!!!
Jim-MRA Posted: Sunday, May 17, 2009 8:15:25 AM(UTC)
 
This could also be a shorted heating element ! If the element is grounded to the case and the timer is in the on position the element will stay hot when not running.
denman Posted: Sunday, May 17, 2009 8:06:02 AM(UTC)
 
Here are your parts
Model Search

Unfortunately the motor has to be replaced.
THIS FORUM IS DEAD!!!!!!!
den6200 Posted: Sunday, May 17, 2009 6:11:43 AM(UTC)
 
My electric dryer heating element continues to heat after the motor has stopped. It is my understanding that this is caused by a faulty centrifical switch which should open the electrical path to the element when the motor is idled. In viewing the electrical schematic I do not see an external switch, however, within the motor it appears two switches are present. The m1 and m2 terminals appear to be connected to the element. Is this a replaceable? Or must the motor be replaced?

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET