Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Post a reply

From:

Message:

Maximum number of characters in each post is: 32767

Font Color Font Size

[quote=rcsch5056;546883]Hi, 
Please I need help!
Just replaced the -PCB- (Printed curcuit board)# 6871W1S128C.
There are 4 wire plugs to connect to the board. 3 of which are murphy proof connections so no problems there. The last is a 2 spade female connector for RY2. Problem is I didn't mark it when seperated it from the board. The female plug, to plug onto the board, has one side with a black & a yellow wire - the other has a black & a red wire. 
what is the correct orientation of the female plug to the RY2.
I am looking at the connection side of the PCB with the RY2 in the lower right corner.
   
Thanks for the help[/quote]

Security Image:

Enter The Letters From The Security Image:

Preview Post Cancel

Last 10 Posts (In reverse order)
rcsch5056	Posted: Tuesday, September 27, 2011 12:01:00 PM(UTC)
	Hi, Please I need help! Just replaced the -PCB- (Printed curcuit board)# 6871W1S128C. There are 4 wire plugs to connect to the board. 3 of which are murphy proof connections so no problems there. The last is a 2 spade female connector for RY2. Problem is I didn't mark it when seperated it from the board. The female plug, to plug onto the board, has one side with a black & a yellow wire - the other has a black & a red wire. what is the correct orientation of the female plug to the RY2. I am looking at the connection side of the PCB with the RY2 in the lower right corner. Thanks for the help

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close