Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Post a reply

From:

Message:

Maximum number of characters in each post is: 32767

Font Color Font Size

[quote=woodchuckie;76645]Make sure the arm is making the switch to start the ice maker. You may can see it by taking the plastic end cover off. 

Manually fill the ice mold and see it it starts the cycle when it freezes and dumps the ice. 

Try swapping the wires on the dual water inlet valve. Then try the water dispenser. The water should go to the ice maker. This will tell you weather or not the ice maker valve is working and if the line is clear[/quote]

Security Image:

Enter The Letters From The Security Image:

Preview Post Cancel

Last 10 Posts (In reverse order)
woodchuckie	Posted: Monday, April 6, 2009 12:02:28 PM(UTC)
	Make sure the arm is making the switch to start the ice maker. You may can see it by taking the plastic end cover off. Manually fill the ice mold and see it it starts the cycle when it freezes and dumps the ice. Try swapping the wires on the dual water inlet valve. Then try the water dispenser. The water should go to the ice maker. This will tell you weather or not the ice maker valve is working and if the line is clear
Chuck Tomney	Posted: Monday, April 6, 2009 10:38:12 AM(UTC)
	I have a Whirpool side by side model #ED5JHGXRQ00 which does not make ice anymore. This is in a recreational rental property in which we instruct our guest when they leave to move the bar to the off position. When putting the bar into the on position, it does not fill up with water? What could be the problem?

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close