Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Post a reply

From:

Message:

Maximum number of characters in each post is: 32767

Font Color Font Size

[quote=Dan0;73565]Maytag Stove model, MER5730AAQ oven temperature is erratic, there are "no" fault codes up the temperature varies both high and low arround the setpoint, (way beyond 20 degrees). There would be two primary causes, the oven sensor or the control unit. Without a fault code there is no sure thing, (both the bake and the broil elements work). Is there some test on the oven sensor, (RTD or thermalcouple) or the control unit without taking a shot in the dark replacing one of the two parts?[/quote]

Security Image:

Enter The Letters From The Security Image:

Preview Post Cancel

Last 10 Posts (In reverse order)
Gene	Posted: Thursday, March 26, 2009 5:54:37 PM(UTC)
	Measure the oven sensor (#5 on the diagram) resistance. It suppose to be about 1100 Ohms at the room temperature. If there is nothing wrong then replace the control board. - The part number for the oven sensor is AP4009009 - The part number for the control board is AP4009004 Here are the break down diagrams and Replacement parts for MAYTAG MER5730AAQ \| AppliancePartsPros.com Gene.
Dan0	Posted: Thursday, March 26, 2009 7:14:43 AM(UTC)
	Maytag Stove model, MER5730AAQ oven temperature is erratic, there are "no" fault codes up the temperature varies both high and low arround the setpoint, (way beyond 20 degrees). There would be two primary causes, the oven sensor or the control unit. Without a fault code there is no sure thing, (both the bake and the broil elements work). Is there some test on the oven sensor, (RTD or thermalcouple) or the control unit without taking a shot in the dark replacing one of the two parts?

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close