Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Post a reply

From:

Message:

Maximum number of characters in each post is: 32767

Font Color Font Size

[quote=zalben;466721]I recently replaced the tub bearing and installed a new mounting stem repair kit. The machine worked fine for a while and then did not spin on the spin cycle. Pump was working and it started spinning again. Today saw that flywheel was not turning during spin cycle and I smelled something electrical burning. Now pump does not work. Machine will fill with water for wash and rinse.
Fuse? Help.[/quote]

Security Image:

Enter The Letters From The Security Image:

Preview Post Cancel

Last 10 Posts (In reverse order)
zalben	Posted: Saturday, June 18, 2011 2:02:21 AM(UTC)
	OK. must be a thermal switch. Pump works. Now I need to know what to do about the flywheel not turning
zalben	Posted: Friday, June 17, 2011 2:23:44 PM(UTC)
	I recently replaced the tub bearing and installed a new mounting stem repair kit. The machine worked fine for a while and then did not spin on the spin cycle. Pump was working and it started spinning again. Today saw that flywheel was not turning during spin cycle and I smelled something electrical burning. Now pump does not work. Machine will fill with water for wash and rinse. Fuse? Help.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close