Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Post a reply

From:

Message:

Maximum number of characters in each post is: 32767

Font Color Font Size

[quote=richappy;412990]You will need to pull the unit away from the wall, remove the back panel, and loosen the motor 9/16 nut, pull the motor back to tighten the belt, then tighten the bolt. Do not make the belt too tight! If the belt is slick, or has burn marks on it, you will need to install a new belt, not an easy job, but doable.[/quote]

Security Image:

Enter The Letters From The Security Image:

Preview Post Cancel

Last 10 Posts (In reverse order)
richappy	Posted: Friday, April 22, 2011 5:52:15 AM(UTC)
	You will need to pull the unit away from the wall, remove the back panel, and loosen the motor 9/16 nut, pull the motor back to tighten the belt, then tighten the bolt. Do not make the belt too tight! If the belt is slick, or has burn marks on it, you will need to install a new belt, not an easy job, but doable.
pauljoz1	Posted: Thursday, April 21, 2011 9:38:38 AM(UTC)
	machine just started running slow everything else works fine is this a loose belt or something worse?

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close