Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Last 10 Posts (In reverse order)
Gene	Posted: Saturday, January 17, 2009 3:32:53 PM(UTC)
	You are welcome. Keep us posted. Gene.
deshawood	Posted: Saturday, January 17, 2009 5:10:06 AM(UTC)
	Thanks Gene, You nailed it. The heating element was fried. I can see exactly where it failed, there are small bubbles on the surface of the element in the area of the failure. Also it is dead when I check it for continuity. I have ordered the replacement element. Thank you for your excellent help!!! Joe
Gene	Posted: Thursday, January 15, 2009 7:27:17 PM(UTC)
	Joe, The convection heating element (#298 on the break down diagram) is behind the rear panel (#248) inside the oven. Remove it and check for continuity. - The part number for the convection heating element is AP2031064 Gene.
deshawood	Posted: Thursday, January 15, 2009 3:06:55 PM(UTC)
	Gene, I was assuming there was only one heating element for both Bake and Convection Bake. You are saying there is a separate Convection heating element? Is it behind the convection fan? If so, I assume if I slide the oven out of the cabinet and remove the top or back panels I can access the heating element? And then just check for conductivity? Thanks, Joe
Gene	Posted: Wednesday, January 14, 2009 6:39:20 PM(UTC)
	Remove and check the convection heating element. Gene.
deshawood	Posted: Wednesday, January 14, 2009 3:50:18 PM(UTC)
	Gene, Yes, the fan comes on and the "Heating" light comes on, but it never heats up. Joe
Gene	Posted: Wednesday, January 14, 2009 10:42:48 AM(UTC)
	Hi Joe, Does the convection fan work when you set the "Convection Bake"? Gene.
deshawood	Posted: Tuesday, January 13, 2009 4:12:35 PM(UTC)
	It has stopped heating on the "Convetion Bake" setting. All the other settings still work. What is the most likely cause? What part number do I need? Joe

Notification