|
Moved to new post
|
|
OK guys. For your files I changed the swicht mtr and the washer works great again, the timer is ok, thank you for all your help
|
|
Very rare these switches go bad unless oil gets in them. Verify with meter good ohms when activated; ie. less than 1 ohm. Check timer also.
|
|
here are pics
|
|
I found burn contacts inside the switch mtr, coul it be the problem?
|
|
Seems like a bad timer. I usually confirm by pulling cover off motor and check for burnt contacts.
|
|
The conectors are ok The washer fill water ok but when starts to wash the motor's relay work intermittent, then I turn the timer mannually, yust a little, and it works all the cycle then drain ok and in the spin cycle agan intermittent, the lid switch is ok, I can see some sparkle in the switch mtr of the motor
|
|
Pull front panel and check the motor connector, you might have a burnt pin. If ok, check your timer connector pins for a bad connection. When the washer becomes intermittent, move the timer to another cycle, if now ok, you probably have a bad timer.
|
|
Hi I have a problem with the relay of the motor sometimes works intermittent could it be a switch mtr problem or the motor?
|