Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Post a reply

From:

Message:

Maximum number of characters in each post is: 32767

Font Color Font Size

[quote=TechnicianBrian;53522]The bottom system pan is held in place with a bolt on each corner, bottom rear of the unit.  Remove the bolt and with some assistance, the pan can be pushed down enough to remove the roller shaft out the side dropping the roller.  Put in a new roller (Part# [URL="http://www.appliancepartspros.com/partsearch/ctrfs.aspx?part_id=3108943&&model_id=504713&diagram_id=131665"][COLOR=#0066cc]AP3108943[/COLOR][/URL]), put the shaft back in and then reinstall the bolt.[/quote]

Security Image:

Enter The Letters From The Security Image:

Preview Post Cancel

Last 10 Posts (In reverse order)
TechnicianBrian	Posted: Thursday, January 1, 2009 7:08:52 AM(UTC)
	The bottom system pan is held in place with a bolt on each corner, bottom rear of the unit. Remove the bolt and with some assistance, the pan can be pushed down enough to remove the roller shaft out the side dropping the roller. Put in a new roller (Part# AP3108943), put the shaft back in and then reinstall the bolt.
joebe	Posted: Thursday, January 1, 2009 6:29:11 AM(UTC)
	Rear roller does not look like it is made to be replaced, but mine is cracked and needs to be replaced. What is the procedure for replacing this wheel. Thanks. joe:confused:

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close