Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Post a reply
From:
Message:

Maximum number of characters in each post is: 32767
Bold Italic Underline   Highlight Quote Choose Language for Syntax Highlighting Insert Image Create Link   Unordered List Ordered List   Left Justify Center Justify Right Justify   Outdent Indent   More BBCode Tags
Font Color Font Size
Security Image:
Enter The Letters From The Security Image:
  Preview Post Cancel

Last 10 Posts (In reverse order)
Orion Restoration Posted: Saturday, March 5, 2011 8:08:30 AM(UTC)
 
Actually I tried that very procedure but was never able to locate the problem. Since the dishwasher is difficult to "uninstall" due to the architectural design of the kitch I decided to use the "shotgun approach" and have ordered a new pump, seals and impeller.

I greatly appreciate your time!
denman Posted: Saturday, March 5, 2011 12:43:45 AM(UTC)
 
Remove the kick plate and get yourself a good flashlight and a small mirror.

The ideal mirror is the type use by mechanics, it is a mirror mounted on an extend-able handle, looks like a dentist's mirror just larger.

In a pinch you could tape a mirror to a piece of doweling.

Then lay on the floor and try to track the leak down.

Be very careful as you are dealing with electricity and water, not a good mix!!
THIS FORUM IS DEAD!!!!!!!
Orion Restoration Posted: Friday, March 4, 2011 9:05:55 AM(UTC)
 
The Kitchenaid dishwasher continues to work well but leaks on the floor during the drain cycle. During the run cycles there is no leak. I can't seem to locate where the leak actually is. Any suggestions? Thanks very much![FONT="Georgia"][COLOR="Navy"][/COLOR][/FONT]