Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Post a reply

From:

Message:

Maximum number of characters in each post is: 32767

Font Color Font Size

[quote=Gene;344046]I'm assuming you are talking about the Bake igniter.

Remove the oven floor and the flame spreader. Remove the two screws holding the igniter to the burner. 

You have to use the old mounting bracket. Be very careful while inserting the new igniter into the bracket because the coil is very gentle and do not touch the coil with your fingers under any circumstances.

 - The Bake igniter [PART]AP4041245[/PART]


Here are the breakdown diagrams and [url=http://www.appliancepartspros.com/partsearch/model.aspx?model_id=20404]Replacement parts for AMANA ARG7800E RANGE- S/C S/I DDRAFT GAS | AppliancePartsPros.com[/url]

Gene.[/quote]

Security Image:

Enter The Letters From The Security Image:

Preview Post Cancel

Last 10 Posts (In reverse order)
Gene	Posted: Tuesday, February 1, 2011 1:41:34 PM(UTC)
	I'm assuming you are talking about the Bake igniter. Remove the oven floor and the flame spreader. Remove the two screws holding the igniter to the burner. You have to use the old mounting bracket. Be very careful while inserting the new igniter into the bracket because the coil is very gentle and do not touch the coil with your fingers under any circumstances. - The Bake igniter Part number: AP4041245 Here are the breakdown diagrams and Replacement parts for AMANA ARG7800E RANGE- S/C S/I DDRAFT GAS \| AppliancePartsPros.com Gene.
harryw0127	Posted: Monday, January 31, 2011 12:53:41 PM(UTC)
	I believe that my oven ignitor has gone out. I would like instructions on how to replace it?

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close