Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Post a reply

From:

Message:

Maximum number of characters in each post is: 32767

Font Color Font Size

[quote=Sgjohnson1;333732]Washer will not drain or start the spin cycle, after filling and agitating just fine.  The washer/dryer combo is more than 10 years old, model Number LTG6234AW1.  I found a repair forum that indicated that the problem was "Direct Drive" coupling.  I removed the water pump and motor, and the three parts that make up the direct drive coupling look fine.  Any other ideas what might be wrong.  Pump looks OK and the motor runs the wash agitate cycle just fine.[/quote]

Security Image:

Enter The Letters From The Security Image:

Preview Post Cancel

Last 10 Posts (In reverse order)
sidfink43	Posted: Sunday, January 16, 2011 4:34:29 PM(UTC)
	Check out the lid switch. Since the machine agitated the mechanical parts should be ok.
Sgjohnson1	Posted: Saturday, January 15, 2011 1:31:07 PM(UTC)
	Washer will not drain or start the spin cycle, after filling and agitating just fine. The washer/dryer combo is more than 10 years old, model Number LTG6234AW1. I found a repair forum that indicated that the problem was "Direct Drive" coupling. I removed the water pump and motor, and the three parts that make up the direct drive coupling look fine. Any other ideas what might be wrong. Pump looks OK and the motor runs the wash agitate cycle just fine.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close