|
Have a Roper machine it will fill, go into wash cycle but won't run through. What do I need to do
|
|
It could be a bad timer or a bad harness connector.
|
|
I have tried running a few cycles since and the issue happens still if I fiddle with the timer or lift the lid and back down it seems to work would this be a possible bad timer or failing one?
|
|
You probably made a questionable connection more solid, by jiggling wires or checking harness connections.
|
|
removed the top panel screws and check the wiring to make sure nothing was loose or shorting out, and now machine cycles properly what could I have done to fix it?
|
|
do you mean hear it running when it should cycle but stops? cannot hear anything but the drum spinning when it first fills.
|
|
ok I will check
|
|
See if you can hear the timer running after the fill.
|
|
I have a Roper Washing machine and when I start any cycle it will fill and then stop if I turn the dial to rinse it will rinse but then stop and not change to the spin cycle.
What could be the cause or steps to trouble shoot?
|