Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Post a reply

From:

Message:

Maximum number of characters in each post is: 32767

Font Color Font Size

[quote=denman;327588]Your model number does not come up, are you sure it is QU and not GU.

The following is for a GU unit.

Have you tried removing power from the unit for 10 minutes or so, to see if it will reset.

Could be that the normal key is stuck (closed).
To check it:
Unplug / remove power from the unit.
Remove the ribbon cable from the control board.
Measure at the ribbon cable using the 20,000 ohm scale.
Place the positive lead on P1-13 and the negative lead on P1-4.
It should measure infinite ohms.
When you press the button you should see the resistance drop.[/quote]

Security Image:

Enter The Letters From The Security Image:

Preview Post Cancel

Last 10 Posts (In reverse order)
denman	Posted: Wednesday, January 5, 2011 2:24:57 AM(UTC)
	Your model number does not come up, are you sure it is QU and not GU. The following is for a GU unit. Have you tried removing power from the unit for 10 minutes or so, to see if it will reset. Could be that the normal key is stuck (closed). To check it: Unplug / remove power from the unit. Remove the ribbon cable from the control board. Measure at the ribbon cable using the 20,000 ohm scale. Place the positive lead on P1-13 and the negative lead on P1-4. It should measure infinite ohms. When you press the button you should see the resistance drop.
	THIS FORUM IS DEAD!!!!!!!
tomsu	Posted: Tuesday, January 4, 2011 7:09:18 PM(UTC)
	My dishwasher doesn't work. The "normal" cycle light blinks all the time. When I press other buttons they dont work either, Please help me.:confused:

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close