|
It is on concrete and leveled perfectly.
|
|
The water you heard sloshing around is in the balance ring for the tub, The noise you heard is NORMAL!!!! Mane sure that the wachine is on a SOLID FLOOR!!! and the rear legs are extended!!!:)
|
|
Hi all, I am having a problem with the spin cycle on this washer. It goes into an unbalance at about the 6 min. mark, but not everytime. I have checked the suspension rods and the hubs under the washplate and all appear to be ok. When i tipped it to check the bottom it appeared to still have some water in the outer tub (it doesnt sound like a lot). Could the problem be weak springs or maybe the secondary water pump. Is this pump supposed to pump the water back into the tub while in the spin cycle? I am stumped why it is doing this. It worked fine for three years and then until this. Thanks for the help
|