|
I would blow in the end of that plastic tube to clear the water out. I also use a turkey baster and pump some vinegar down it to dissolve any soap residue.
|
|
If there is water in the tube(sorry didn't hit the E before) that will effect the water level. Nat
|
|
nat water not in tub but small amount settles in the plastic air cup from which a plastic tube goes to pressure switch. i'll check hose for holes. would water in plastic air cup affect level in tub.
|
|
If there is water in the tub you need to get that out. check for cracks or pin holes in the tube. nat
|
|
water level not shutting off. before i replace pressure switch i want to know if small amount of water in the plastic pressure cup at the bottom of tub has any affect on level . low low works but the
thanks fran.
|