|
There is still some air remains in the water system. You have to drain out at least 3 gallons of water.
|
|
Gene, I drained only a quart of water and the dispenser would shut off, but the flow of water is not much more than a trickle.
|
|
Thanks Gene. I will try that.
|
|
After installation of the new water filter, the water system needs to be flushed. Use a sturdy container to depress and hold the water dispenser lever for 5 seconds, then release it for 5 seconds. Repeat until water begins to flow. Once water begins to flow, continue depressing and releasing the dispenser lever (5 seconds on, 5 seconds off) until total of at least 3 gallons has been dispensed. This will flush air from the filter and water dispensing system. As air is cleaned from the system, water may spurt out of the dispenser.
Gene.
|
|
Replaced water filter and now the water dispenser won't shut off.
|