|
Very good advice Gene.
I have seen alot of guys just thaw the line, and not replace the valve. Though this may work on occasion, normally the frozen line syndrome is caused by a bad inlet valve.
Matt
|
|
The first thing I would check is the water feeding tube into the ice maker for ice inside. If it's frozen, you can use a hair dryer to defrost it. In that case the water inlet valve has to be replaced. - The part number for the water inlet valve is AP4298908 Gene.
|
|
WATER DISPINCES INTO GLASS ,BUT NO WATER GOES INTO ICE MAKER:o
|