Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Post a reply

From:

Message:

Maximum number of characters in each post is: 32767

Font Color Font Size

[quote=master54handyman;870853][QUOTE=denman;870643]Here are your parts
[url=http://www.appliancepartspros.com/partsearch/modelsearch.aspx?model=Rf362lxss]Parts for RF362LXSS - AppliancePartsPros.com[/url]

See the attachment for the tech sheet.

Not sure what is going on.

Are both elements on at the same time when in bake?
They should not be.
They should switch back and forth.
Even if they are both on at the same time they should only pull around 25 amps. So the breaker should not trip unless you also have stove top elements on.

Do both elements heat evenly along their length?
If not it may be a bad element.

I would check the connections at the wall receptacle and the terminal strip in the unit.
Be sure that the power is Off when doing this.[/QUOTE]
Thanks this makes more sense than any of the other posts.  I'll let you know what I find.[/quote]

Security Image:

Enter The Letters From The Security Image:

Preview Post Cancel

Last 10 Posts (In reverse order)
master54handyman	Posted: Sunday, November 30, 2014 6:16:58 AM(UTC)
	Originally Posted by: denman Here are your parts Parts for RF362LXSS - AppliancePartsPros.com See the attachment for the tech sheet. Not sure what is going on. Are both elements on at the same time when in bake? They should not be. They should switch back and forth. Even if they are both on at the same time they should only pull around 25 amps. So the breaker should not trip unless you also have stove top elements on. Do both elements heat evenly along their length? If not it may be a bad element. I would check the connections at the wall receptacle and the terminal strip in the unit. Be sure that the power is Off when doing this. Thanks this makes more sense than any of the other posts. I'll let you know what I find.
denman	Posted: Friday, November 28, 2014 3:18:11 AM(UTC)
	Here are your parts Parts for RF362LXSS - AppliancePartsPros.com See the attachment for the tech sheet. Not sure what is going on. Are both elements on at the same time when in bake? They should not be. They should switch back and forth. Even if they are both on at the same time they should only pull around 25 amps. So the breaker should not trip unless you also have stove top elements on. Do both elements heat evenly along their length? If not it may be a bad element. I would check the connections at the wall receptacle and the terminal strip in the unit. Be sure that the power is Off when doing this.
	THIS FORUM IS DEAD!!!!!!!
master54handyman	Posted: Thursday, November 27, 2014 1:23:12 PM(UTC)
	50 amp breaker trips during oven operation. Replaced breaker, same problem. Unit should operate on 40 amp breaker. Top and bottom elements operate in bake mode.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close