|
Hello I wanted to know what tool is needed to charge the gas cooler gas repair
|
|
Does anyone know what the tolerance is for the coils inside of a drain pump I am wondering if mine isn't too high I know that is a long distance to carry a charge but I got 13 ohms when I tested it. is that within spec or is it a little high it has stopped the drain process once but all O-rings are good and wires test out fine. this is the second drain pump in 4 months.
|
|
Good news! Hopefully the problem gone.
Gene.
|
|
Originally Posted by: Gene You are welcome. Keep us posted.
Gene. After checking the fuse and finding it intact i put the rear cover back on thinking my next move would be to call a qualified repair man...when i plugged it back in it started working and has been working great ever since. Thanks for the advise.
|
|
You are welcome. Keep us posted.
Gene.
|
|
Your right...i'll check the fuse first...Thanks again Gene!
|
|
I do not think that resetting the power will help in such situation. I also do not think that it is a good idea to replace the part without testing it for continuity first. It was just an educated guess on my side. You have to verify it.
Gene.
|
|
Originally Posted by: Gene Hello, There is the inline thermal fuse which is wired into the red wire connected to the control board. Very likely this fuse is open. - The inline thermal fuse Part number: 9781691
Thank you Gene...i was told to try and reset the unit by unplugging for 2 minutes. Is this a viable first step or should i just replace this fuse first?
|
|
Hello, There is the inline thermal fuse which is wired into the red wire connected to the control board. Very likely this fuse is open. - The inline thermal fuse Part number: 9781691
|
|
Can someone help me with a problem with my whirlpool model gr450lxlb0 oven elements not coming on even though the control panel counts down on preheat and starts the cook time?
|