|
Here are your parts, includes a wiring diagram. Parts for Frigidaire LEQ2152EE0 Dryer - AppliancePartsPros.comHere is a tech sheet. http://manuals.frigidaire.com/p...Webster/134509400efs.pdfCould be the control board or the centrifugal switch on the motor. But the first thing to check is the power. The board, motor and drum light all use half the line (120 volts) but the heater coil requires the full 240 volts. Try flipping the breaker off/on slowly, sometimes you can loose half the line without actually tripping the breaker. If this does nothing, check the voltage at the plug L1 to L2 should be 240 volts L1 to Neutral and L2 to Neutral, both should be 120 volts. If OK Unplug the unit and check the wires at the terminal strip in the machine to make sure none are loose or burned out If OK Check the power at the terminal strip. [COLOR="Red"]Be careful as 240 volts is lethal !!![/COLOR]
|
| THIS FORUM IS DEAD!!!!!!! |
|
Just replaced heating element, thermostat, thermal limiter, and thermistor control and the dryer still will not heat up! Could the problem be in the control panel or is there any other options?:confused:
|