Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Post a reply

From:

Message:

Maximum number of characters in each post is: 32767

Font Color Font Size

[quote=denman;693965]You could have a problem with the heating coil.

Remove the wires from it and measure it with a meter, most are in the 10 to 13 ohm range.
If OK then measure from each side of the coil to the frame, both should be infinite ohms (open). Be sure to find an unpainted part of the frame.[/quote]

Security Image:

Enter The Letters From The Security Image:

Preview Post Cancel

Last 10 Posts (In reverse order)
denman	Posted: Saturday, March 17, 2012 10:51:48 AM(UTC)
	You could have a problem with the heating coil. Remove the wires from it and measure it with a meter, most are in the 10 to 13 ohm range. If OK then measure from each side of the coil to the frame, both should be infinite ohms (open). Be sure to find an unpainted part of the frame.
	THIS FORUM IS DEAD!!!!!!!
donnie06	Posted: Saturday, March 17, 2012 8:51:27 AM(UTC)
	i have a frigidaire electric dryer the heating element went bad replaced it and put everything back together and turn it back on it turns half of a turn and kicks the breaker. anyone know what would be causing this?

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close