Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Post a reply

From:

Message:

Maximum number of characters in each post is: 32767

Font Color Font Size

[quote=denman;342371]It does not make a difference as the valve is 120 volts AC.[/quote]

Security Image:

Enter The Letters From The Security Image:

Preview Post Cancel

Last 10 Posts (In reverse order)
mikegundy	Posted: Saturday, January 29, 2011 4:03:26 PM(UTC)
	Originally Posted by: denman It does not make a difference as the valve is 120 volts AC. Thank you sir.
denman	Posted: Saturday, January 29, 2011 2:05:35 PM(UTC)
	It does not make a difference as the valve is 120 volts AC.
	THIS FORUM IS DEAD!!!!!!!
mikegundy	Posted: Saturday, January 29, 2011 8:37:14 AM(UTC)
	When replacing the water valve on GE PDW8400 dishwasher, is there right way vs. wrong way to reattach the wiring harness to the water valve. I didn't pay close enough attention when I pulled it off, and have some concern about putting it back incorrrectly, or does it matter? The wiring harness has three wires running into it. One is white with a red stripe, and the other two are yellow. The two yellow's run into the same side on the clip, opposite of the white/red wire. Thanks

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close