Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Post a reply

From:

Message:

Maximum number of characters in each post is: 32767

Font Color Font Size

[quote=brianosaur;323440]All control panel buttons and lights appear to be working normally.  Door locks fine.  Nothing stuck under auto shutoff float. 

I shut breaker off for 5 mins and attempted to restart.

Nothing happens after start button pressed, lit and door shut.  No water runs.

Worked fine yesterday.  No signs of anything breaking or running intermittently.  Just DOA now.

Any suggestions?  Tnx[/quote]

Security Image:

Enter The Letters From The Security Image:

Preview Post Cancel

Last 10 Posts (In reverse order)
denman	Posted: Friday, December 31, 2010 2:22:49 AM(UTC)
	Here are your parts Replacement parts for WHIRLPOOL KUDP01FLSS6 UNDERCOUNTER DISHWASHER \| AppliancePartsPros.com Check that the unit is getting power. Check that the wire nut connections are OK. Check the door switches. A common problem is the thermal fuse Item 6 in Section 2. If it is blown be sure to use the new wiring harness that is included with the fuse. This does not totally eliminate that something else is blowing the fuse but often it is just the hook up of the fuse.
	THIS FORUM IS DEAD!!!!!!!
brianosaur	Posted: Tuesday, December 28, 2010 4:31:59 PM(UTC)
	All control panel buttons and lights appear to be working normally. Door locks fine. Nothing stuck under auto shutoff float. I shut breaker off for 5 mins and attempted to restart. Nothing happens after start button pressed, lit and door shut. No water runs. Worked fine yesterday. No signs of anything breaking or running intermittently. Just DOA now. Any suggestions? Tnx

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close