Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Post a reply

From:

Message:

Maximum number of characters in each post is: 32767

Font Color Font Size

[quote=armdog;181653]Dishwasher stopped washing but still drains. I took apart and found that where metal piece in  chopper and screen completely clogged. Where the chopper and impeller meet each end is broke. How do I know if the motor is still good therefore only replace chopper and impeller.[/quote]

Security Image:

Enter The Letters From The Security Image:

Preview Post Cancel

Last 10 Posts (In reverse order)
denman	Posted: Wednesday, February 3, 2010 12:10:24 AM(UTC)
	Here are your parts Replacement parts for WHIRLPOOL GU1200XTLT0 Undercounter Dishwasher \| AppliancePartsPros.com Often if you click on a parts picture a new page will open with more views of that part. Then clicking on a new view should expand it so you can see it better. Here is the tech sheet http://www.servicematters.com/docs/wiring/Tech%20Sheet%20-%208533399.pdf Manually rotate the motor's armature to ensure the bearings etc. are OK. Check the windings with a meter to see if they are OK If both OK then motor is probably good OR Remove the motor from the unit and hook it up to a line cord and give it a try. You may not even have to remove it from the machine.
	THIS FORUM IS DEAD!!!!!!!
armdog	Posted: Tuesday, February 2, 2010 1:57:59 PM(UTC)
	Dishwasher stopped washing but still drains. I took apart and found that where metal piece in chopper and screen completely clogged. Where the chopper and impeller meet each end is broke. How do I know if the motor is still good therefore only replace chopper and impeller.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close