Oven Repair (including Ranges and Cooktops)

tsimonsen · #1 (**permalink**) 05-28-2010, 05:23 PM

We moved my double convection oven. We removed the doors and then reinstalled them. The doors went in just like they had before but when I used the oven tonight and closed the door, one side is lopsided. We removed the doors and then the other side is lopsided and the first lopsided door side was fine. It does not go in all the way and sags into the bottom oven door. I looked for the model # and could not find it anywhere.

denman · #2 (**permalink**) 05-29-2010, 03:05 AM

Following is a manual
http://frigidaireservicetips.com/pdfs/481_18.pdf

I am not sure this is applicable but take a look at Page 40

tsimonsen · #3 (**permalink**) 05-29-2010, 05:39 AM

That is what we did but it seems it won't connect evenly. Anyone have any other suggestions?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oven door will not close	dkoakes	Oven Repair (including Ranges and Cooktops)	0	11-01-2009 12:10 PM
Oven Door Won't Close!!!	glenardee	Oven Repair (including Ranges and Cooktops)	1	09-29-2009 03:30 AM
oven door won't close	jeanpier	Oven Repair (including Ranges and Cooktops)	6	07-31-2008 12:44 PM
Oven door won't close	hamconsulting	Oven Repair (including Ranges and Cooktops)	3	07-23-2008 07:33 PM
My Oven Door Latch Won't unlock so the door won"t close	Victorine Ravenell	Oven Repair (including Ranges and Cooktops)	1	11-14-2007 10:40 AM

Oven door won't close right

Oven Repair (including Ranges and Cooktops)

We moved my double convection oven. We removed the doors and then reinstalled them. The doors went in just like