|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Gas Cooktop igniter inoperative |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
05-10-2010, 04:05 PM
|
|||
|
|||
Gas Cooktop igniter inoperative
Model Number: KGCT365BAL 2 Brand: Kitchen Aid Age: More than 10 years
2 of the 4 burner igniters are inoperative. I tested them by removing an OUTPUT wire from the Spark Module that goes to a working burner (#4), and connected it, one at a time, to each of the bad burners (#1 & #2) igniters. They both now work. They work by using the bad burners Switches (#1 & #2) on the control panel. I don't know why the #1 or #2 INPUT wires to the Module sends current to the #4 OUTPUT wire. Can someone explain if this is an accurate test?? It appears the Spark Module is defective since it received the proper input signals. Do you agree with my diagnosis that the Spark Module is bad??
Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| M/w Oven Cooktop Light Inoperative | wbuck3 | Microwave Repair | 0 | 09-28-2009 11:22 AM |
| cooktop igniter not working | bones666 | Oven Repair (including Ranges and Cooktops) | 0 | 04-01-2009 05:22 PM |
| Gas cooktop igniter problem | davgus | Oven Repair (including Ranges and Cooktops) | 0 | 02-19-2009 11:22 AM |
| GE cooktop Igniter | SteveA | Oven Repair (including Ranges and Cooktops) | 1 | 08-20-2008 04:49 PM |
| GE gas cooktop igniter won't spark and lit | ewe | Oven Repair (including Ranges and Cooktops) | 1 | 03-04-2008 03:43 PM |
Linear Mode
