Rank: Member
Groups: Registered
Joined: 4/14/2010(UTC) Posts: 1
|
The elements on my Ceran cooktop quit working. I've checked the breaker and it isn't tripped. What am I missing?
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC) Posts: 19,638
Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)
|
Try flipping the breaker off/on slowly a couple times. Sometimes you can loose half the line and without actually tripping the breaker.
If this does nothing then you will need a meter to check the power. L1 to L2 should be 240 volts L1 to Neutral and L2 to Neutral both should be 120 volts.
If you decide to do this be very, very careful as 240 volts is lethal!!!1 |
THIS FORUM IS DEAD!!!!!!! |
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close