Oven Repair (including Ranges and Cooktops)

TrishK · #1 (**permalink**) 05-17-2008, 04:59 PM

We went to use the oven and it indicates it is "Locked" as if we were preparing to self clean. The door opens but will not allow temperature to be set. We had the a service person out last week to replace the ignitor and the idea of a second service call in 7 days makes me cringe. Please help.

TrishK · #2 (**permalink**) 05-19-2008, 01:05 PM

after I didn't get a reply from anyone, we tried to initiate a self-clean cycle and after a minute we received an F9 error. For our model, that indicates door latch....to check door component. To the untrained eye, the door and latch seem fine. What now?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
oven door locked/no power to display panel	bobfixit	Oven Repair (including Ranges and Cooktops)	3	05-13-2008 05:00 PM
Replace control panel or just control panel housing?	Max Strano	Dishwasher Repair	0	03-06-2008 07:07 AM
Control Panel Assembly for GE Oven	cbarker79	Oven Repair (including Ranges and Cooktops)	0	12-29-2007 05:26 AM
Maytag Electronic Oven Control Panel	MDB	Oven Repair (including Ranges and Cooktops)	2	12-07-2007 03:28 PM
replacing oven control panel	brad	Oven Repair (including Ranges and Cooktops)	1	08-02-2007 04:31 PM

oven control panel indicates LOCKED

Oven Repair (including Ranges and Cooktops)

We went to use the oven and it indicates it is "Locked" as if we were preparing to