|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Help - How to adjust xlo burner flame |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
02-13-2010, 10:09 AM
|
|||
|
|||
Help - How to adjust xlo burner flame
Model Number: PSC486GLZS/01 Brand: Thermador Age: 1 - 5 years
I installed a Thermador PSC486GLZS cooktop a few years back, and at the time of installation also converted the top for propane use. I adjusted the flame heights to the best of my ability referencing Thermador's manual. For the XLO burners, they will not work below a normal low setting. By this I mean that they will not remain lit on the XLO side of the knob band. Any advice to corectly adjust the burners so that the XLO setting work would be appreciated. To note : I utilized the recommended propane valve on the tank for correct flow / pressure.
Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| jennair burner uneven flame | saxo08 | Oven Repair (including Ranges and Cooktops) | 0 | 02-25-2010 04:39 PM |
| viking burner flame jumps | inahi | Oven Repair (including Ranges and Cooktops) | 0 | 01-05-2010 09:51 PM |
| weak flame on oven burner | rjr64 | Oven Repair (including Ranges and Cooktops) | 1 | 06-21-2009 07:38 PM |
| oven burner low flame | max | Oven Repair (including Ranges and Cooktops) | 20 | 11-06-2008 11:42 AM |
| yellow oven burner flame | nicheliz | Oven Repair (including Ranges and Cooktops) | 2 | 10-09-2007 11:11 AM |
Linear Mode
